In article ,
Adam H. Kerman wrote:
Robert Bonomi wrote:
Stephen Sprunk wrote:

Load limits are specified per axle or tandem, and tank transporters have
_lots_ of axles to spread the tank's weight out.

Some are, some are *not*.

'More axles' doesn't make any difference to a bridge span. grin.

Can you expound on that? Bridges have a rated weight limit. If truck
weight is at the limit, why wouldn't the bridge benefit from improved
live load weight distribution, particularly if truck length exceeds
span length?

An extreme case -- if the static weight of the vehicle exceeds the load at
which the span will collapse, and the span is longer than the wheelbase, it
doesn't matter whether it's a unicycle, or has wheels every 2 ft.

Or, consider a short span, just under the vehicle wheelbase. You can move
a two-axle load over that span that is nearly twice the 'collapse' loading,
because only half the load will be on the span at any time. Add a 3rd
axle, at the midpoint, and the total load on the span goes -up-.


Also, bridge spans, in general, tend to have a 'crown' along the length of
the span, as well as the side-to-side crowning. A side effect of that
longitudinal crowning is that interior axles carry somewhat more weight
than leading/trailing ones.